How to fix and prevent Samsung Galaxy S5 from overheating [Troubleshooting Guide]

How to fix and prevent Samsung Galaxy S5 from overheating [Troubleshooting Guide] - Some mid-range phones will take the all-round good-value approach, with capable specs in each area; others will focus on a key area such as the camera or display and promise flagship-rivalling capability; and others still used to be those flagships, so will offer a fantastic spec at a brilliant price. Display and more to its cheaper , well we have collected a lot of data from the field directly and from many other blogs so very complete his discussion here about How to fix and prevent Samsung Galaxy S5 from overheating [Troubleshooting Guide], on this blog we also have to provide the latest automotive information from all the brands associated with the automobile. ok please continue reading:

After the Android 5 Lollipop update, there have been so many Samsung Galaxy S5 owners who were complaining about their devices heating up to the point that they overheat. As a result, the performance is affected as the phone starts to become sluggish and sometimes reboots on its own.

In this post, I will quickly walk you through troubleshooting the overheating issue and prevent it from happening again in the past.

MUST VISIT: http://casalloiranovinhaenegao.blogspot.com /2015/06/samsung-galaxy-s5-troubleshooting.html" target="_blank">Samsung Galaxy S5 Troubleshooting Page

Step 1: Boot the Galaxy S5 in safe mode

Let us immediately isolate the problem. I understand you just updated your phone so it is very much possible that some caches of your apps have gone corrupt resulting to conflicts when the new system had its first run.

Booting in safe mode will temporarily disable those apps leaving the phone running in its barebones. If the overheating was caused by one or some of the apps, then the device should not overheat when in safe mode. Follow these steps to boot in safe mode…

1. Turn the device off.
2. Press and hold the Power key.
3. When 'Samsung Galaxy S5' appears on the screen, release the Power key.
4. Immediately after releasing the Power key, press and hold the Volume down key.
5. Continue to hold the Volume down key until the device finishes restarting.
6. Safe mode will display in the bottom left corner of the screen.
7. Release the Volume down key when you see Safe Mode.

In case your newly updated Galaxy S5 still heats in safe mode, then it concerns the firmware now and not just apps.

Step 2: Wipe the cache partition

During the first boot, the Android system regardless of the version will create files that will be used to make apps run smoothly the next time the owner opens them. These files will stay in the cache partition until the users deletes them.

When you update your phone, those files will automatically become obsolete but will never be deleted. The new system may still attempt to use pre-existing files and that's when conflicts are created, which will also contribute to the overheating issue.

Wiping the cache partition will dump all those files and force the phone to create new ones, this time they're compatible with the current version. That is why it is necessary to delete those caches from time to time or after an update. Here's how…

1. Turn off the device.
2. Press and hold the following three buttons at the same time: Volume Up key, Home key, and Power key.
3. When the phone vibrates, release the Power key but continue to press and hold the Volume Up key and the Home key.
4. When the Android System Recovery screen appears, release the Volume Up and Home keys.
5. Press the Volume Down key to highlight 'wipe cache partition.'
6. Press the Power key to select.
7. When the wipe cache partition is complete, 'Reboot system now' is highlighted.
8. Press the Power key to restart the device.

If the problem remained after wiping the cache partition, then it's time you did a more complicated troubleshooting procedure that will delete everything in the phone's storage as well as reset everything to factory defaults.

Step 3: Perform full hard reset

This is going to be your last result to fix the overheating issue that is caused by the recent Lollipop update. Apparently, the problem is just because of the corrupt caches but may also be because of corrupt Android data. You need to delete all those data and eliminate everything in the data partition to give the phone a fresh start with its new firmware.

Before you actually reset your phone, make sure you backup every bit of data you don't want to lose. Remember, reset will delete all files, settings, apps, etc. that were store in the phone's internal storage. If you have a microSD card, then just transfer them over and remove the card, and then, follow these steps…

1. Turn off the device.
2. Press and hold the following three buttons at the same time: Volume Up key, Home key, and Power key.
3. When the phone vibrates, release the Power key but continue to press and hold the Volume Up key and the Home key.
4. When the Android System Recovery screen appears, release the Volume Up and Home keys.
5. Press the Volume down key several times key to highlight 'wipe data / factory reset.'
6. Press Power button to select.
7. Press the Volume down key until 'Yes -- delete all user data' is highlighted.
8. Press Power button to select and start the master reset.
9. When the master reset is complete, 'Reboot system now' is highlighted.
10. Press the Power key to restart the device.

I hope this troubleshooting guide helps.